marmol Travertino Rojo

Red Travertino Marble

 Marble

The Spanish Red Travertino marble is a world reference, the most popular red in the world of travertino marbles.

This article is considered high-end, luxurious, widely used by people who want to submerge their rooms, whether works of house or building, in an atmosphere of great distinction.

The red color of the travertino marble is a very intense color, with bronze tones that give this stone great strength at first sight.

The stone is long-lasting and can withstand large temperature changes in the open air. In addition, it always keeps the same everything, which makes it ideal for large jobs where you have to be careful to keep the facade homogeneous.

Finishing

Physical and Mechanical Characteristics

PROPIEDADES FÍSICO-QUÍMICAS STANDAR DE LOS TEST VALOR REQUERIDO VALOR MEDIO FMG
absorcion del liquido LIQUID ABSORPTION ISO 10545.3 ≤0,5% 0,10% (*)10
resistencia-flexion BENDING STRENGTH ISO 10545.4 Modulus ≥35 N/mm² Resistance to breakage ≥1300 N/mm² 188 Kg / cm²
resitencia-desgaste RESISTANCE TO DEEP ABRASION ISO 10545.6 Volume ≤175 mm³ 120 mm³
(tested by Smith Emery Laboratory)
resistencia al frio COLD RESISTANCE ISO 10545.12 No appreciable colour variations on the surface Freezing test
termal-expansion COEFFICIENT OF LINEAR TEMPERATURE EXPANSION ISO 10545.8 ≤9x10‾6 °C‾¹ ≤6,5x10‾6 °C‾¹
resistencia del color a la luz COLOUR FASTNESS TO LIGHT DIN 51094 No appreciable colour variations on the surface No change in brightness or color of samples
resistencia quimica CHEMICAL RESISTANCE ISO 10545.13 Must not produce obvious signs of chemical attack No change
resistencia a la suciedad RESISTANCE TO DIRT ISO 10545.14 1 ‹ X ‹ 5 Stains go away with running hot water (without detergent)(**)
coeficiente de friccion FRICTION COEFFICIENT BCRA REP CEC 6/81 Satisfactory friction 0,42 - 0,75 (*)
coeficiente de friccion FRICTION COEFFICIENT DIN 51130 Available test method May vary depending on surface finish

(*) = Products with an absorption of <0,5 are classified according to UNI CEN standards “fine stoneware tiles” and ASTM standards “waterproof tiles”.
(**) = May vary depending on surface finish

Recommendations for use

Sizes

medidas

60X30 cm – 24″X11″
60X40 cm – 24″X15″
30X30 cm – 11″X11″
40X40 cm – 15″X15″
50X50 cm – 19″X19″
60X60 cm – 24″X24″

Scroll to Top