marmol perlato

Perlato Marble

 Marble

The Perlato Marble is a Equigranular and homogeneous stone, full of veins and dolomitization espartita to 20%.

Light cream of beige marble and green tones. Once installed it gives a satisfactory result. Very suitable for large spaces and high traffic public facilities inside.

Finishing

Physical and Mechanical Characteristics

PROPIEDADES FÍSICO-QUÍMICAS STANDAR DE LOS TEST VALOR REQUERIDO VALOR MEDIO FMG
absorcion del liquido LIQUID ABSORPTION ISO 10545.3 ≤0,5% 0,07% (*)
resistencia-flexion BENDING STRENGTH ISO 10545.4 Modulus ≥35 N/mm² Resistance to breakage≥1300 N/mm² 35 N/mm²
resitencia-desgaste RESISTANCE TO DEEP ABRASION ISO 10545.6 Volume ≤175 mm³ 110 mm³ (tested by Smith Emery Laboratory)
resistencia al frio COLD RESISTANCE ISO 10545.12 No appreciable colour variations on the surface Freezing test
termal-expansion COEFFICIENT OF LINEAR TEMPERATURE EXPANSION ISO 10545.8 ≤9x10‾6 °C‾¹ ≤6,5x10‾6 °C‾¹
resistencia del color a la luz COLOUR FASTNESS TO LIGHT DIN 51094 No appreciable colour variations on the surface No change in brightness or color of samples
resistencia quimica CHEMICAL RESISTANCE ISO 10545.13 Must not produce obvious signs of chemical attack No change
resistencia a la suciedad RESISTANCE TO DIRT ISO 10545.14 1 ‹ X ‹ 5 Stains go away with running hot water (without detergent)(**)
coeficiente de friccion FRICTION COEFFICIENT BCRA REP CEC 6/81 Satisfactory friction 0,42 - 0,75 (*)
coeficiente de friccion FRICTION COEFFICIENT DIN 51130 Available test method May vary depending on surface finish

(*) = Products with an absorption of <0,5 are classified according to UNI CEN standards “fine stoneware tiles” and ASTM standards “waterproof tiles”.
(**) = May vary depending on surface finish

Recommendations for use

Sizes

medidas

60X30 cm – 24″X11″
60X40 cm – 24″X15″
30X30 cm – 11″X11″
40X40 cm – 15″X15″
50X50 cm – 19″X19″
60X60 cm – 24″X24″

Scroll to Top