Alicante Red Marble
The Alicante Red Marble is the perfect combination of rough, red and hot stone, with the elegance of its very delicate, soft and subtle white veins. Its result can only be considered as extraordinary.
Functional and comfortable, easy to care for and clean, it is especially suitable for open spaces and interior finishes. Its exceptional strength makes it more suitable for floors (paving) and facades. The class and style you will get with it are unquestionable.
Physical and Mechanical Characteristics
|PROPIEDADES FÍSICO-QUÍMICAS||STANDAR DE LOS TEST||VALOR REQUERIDO||VALOR MEDIO FMG|
|LIQUID ABSORPTION||ISO 10545.3||≤0,5%||0,07% (*)|
|BENDING STRENGTH||ISO 10545.4||Modulus ≥35 N/mm² Resistance to breakage ≥1300 N/mm²||35 N/mm²|
|RESISTANCE TO DEEP ABRASION||ISO 10545.6||Volume ≤175 mm³||110 mm³ (tested by Smith Emery Laboratory)|
|COLD RESISTANCE||ISO 10545.12||No appreciable colour variations on the surface||Freezing test|
|COEFFICIENT OF LINEAR TEMPERATURE EXPANSION||ISO 10545.8||≤9x10‾6 °C‾¹||≤6,5x10‾6 °C‾¹|
|COLOUR FASTNESS TO LIGHT||DIN 51094||No appreciable colour variations on the surface||No change in brightness or color of samples|
|CHEMICAL RESISTANCE||ISO 10545.13||Must not produce obvious signs of chemical attack||No change|
|RESISTANCE TO DIRT||ISO 10545.14||1 ‹ X ‹ 5||Stains go away with running hot water (without detergent)(**)|
|FRICTION COEFFICIENT||BCRA REP CEC 6/81||Satisfactory friction||0,42 - 0,75 (*)|
|FRICTION COEFFICIENT||DIN 51130||Available test method||May vary depending on surface finish|
(*) = Products with an absorption of <0,5 are classified according to UNI CEN standards “fine stoneware tiles” and ASTM standards “waterproof tiles”.
(**) = May vary depending on surface finish
Recommendations for use
60X30 cm – 24″X11″
60X40 cm – 24″X15″
30X30 cm – 11″X11″
40X40 cm – 15″X15″
50X50 cm – 19″X19″
60X60 cm – 24″X24″